Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.99.59 (NBWS) #7: Wed Jan 11 15:36:07 CET 2012 rkujawa@raika.home.c0ff33.net:/home/rkujawa/NetBSD-cvs-HEAD-2/src/sys/arch/amd64/compile/obj/NBWS total memory = 3839 MB avail memory = 3715 MB timecounter: Timecounters tick every 10.000 msec timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 System manufacturer System Product Name (System Version) mainbus0 (root) cpu0 at mainbus0 apid 0: AMD Phenom(tm) 9550 Quad-Core Processor, id 0x100f23 cpu1 at mainbus0 apid 1: AMD Phenom(tm) 9550 Quad-Core Processor, id 0x100f23 cpu2 at mainbus0 apid 2: AMD Phenom(tm) 9550 Quad-Core Processor, id 0x100f23 cpu3 at mainbus0 apid 3: AMD Phenom(tm) 9550 Quad-Core Processor, id 0x100f23 ioapic0 at mainbus0 apid 4: pa 0xfec00000, version 21, 24 pins acpi0 at mainbus0: Intel ACPICA 20110623 acpi0: X/RSDT: OemId <070908,OEMXSDT ,20080709>, AslId acpi0: SCI interrupting at int 9 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400) timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000 BROD (PNP0C02) at acpi0 not configured attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0 pcppi1 at acpi0 (SPKR, PNP0800): io 0x61 midi0 at pcppi1: PC speaker sysbeep0 at pcppi1 aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster OMSC (PNP0C02) at acpi0 not configured RMSC (PNP0C02) at acpi0 not configured SIOR (PNP0C02) at acpi0 not configured PCIE (PNP0C02) at acpi0 not configured RMEM (PNP0C01) at acpi0 not configured acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button AWY (AWY0001) at acpi0 not configured acpiwmi0 at acpi0 (WMI, PNP0C14-0): ACPI WMI Interface acpiwmibus at acpiwmi0 not configured attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9600 (rev. 0x00) ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x9602 (rev. 0x00) pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled genfb0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9610 genfb0: framebuffer at 0xd0000000, size 1024x768, depth 16, stride 2048 wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation) wsmux1: connecting to wsdisplay0 radeondrm0 at genfb0: ATI Radeon HD 3200 Graphics radeondrm0: Initialized radeon 1.29.0 20080613 ppb1 at pci0 dev 6 function 0: vendor 0x1022 product 0x9606 (rev. 0x00) ppb1: PCI Express 2.0 pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok age0 at pci2 dev 0 function 0: Attansic/Atheros L1 Gigabit Ethernet age0: ioapic0 pin 18 age0: Ethernet address ed:9f:ff:ff:ff:ff atphy0 at age0 phy 0: L1 10/100/1000 PHY, rev. 5 atphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, auto ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 ahcisata0: interrupting at ioapic0 pin 22 ahcisata0: 64-bit DMA ahcisata0: AHCI revision 1.10, 6 ports, 32 slots, CAP 0xf722ff85 atabus0 at ahcisata0 channel 0 atabus1 at ahcisata0 channel 1 atabus2 at ahcisata0 channel 2 atabus3 at ahcisata0 channel 3 atabus4 at ahcisata0 channel 4 atabus5 at ahcisata0 channel 5 ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00) ohci0: interrupting at ioapic0 pin 16 ohci0: OHCI version 1.0, legacy support usb0 at ohci0: USB revision 1.0 ohci1 at pci0 dev 18 function 1: vendor 0x1002 product 0x4398 (rev. 0x00) ohci1: interrupting at ioapic0 pin 16 ohci1: OHCI version 1.0, legacy support usb1 at ohci1: USB revision 1.0 ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00) ehci0: applying AMD SB600/SB700 USB freeze workaround ehci0: interrupting at ioapic0 pin 17 ehci0: dropped intr workaround enabled ehci0: EHCI version 1.0 ehci0: companion controllers, 3 ports each: ohci0 ohci1 usb2 at ehci0: USB revision 2.0 ohci2 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00) ohci2: interrupting at ioapic0 pin 18 ohci2: OHCI version 1.0, legacy support usb3 at ohci2: USB revision 1.0 ohci3 at pci0 dev 19 function 1: vendor 0x1002 product 0x4398 (rev. 0x00) ohci3: interrupting at ioapic0 pin 18 ohci3: OHCI version 1.0, legacy support usb4 at ohci3: USB revision 1.0 ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00) ehci1: applying AMD SB600/SB700 USB freeze workaround ehci1: interrupting at ioapic0 pin 19 ehci1: dropped intr workaround enabled ehci1: EHCI version 1.0 ehci1: companion controllers, 3 ports each: ohci2 ohci3 usb5 at ehci1: USB revision 2.0 vendor 0x1002 product 0x4385 (SMBus serial bus, revision 0x3a) at pci0 dev 20 function 0 not configured pciide0 at pci0 dev 20 function 1: vendor 0x1002 product 0x439c (rev. 0x00) pciide0: bus-master DMA support present, but unused (no driver support) pciide0: primary channel configured to compatibility mode before splbio() pciide0: primary channel ignored (not responding; disabled or no drives?) pciide0: secondary channel configured to compatibility mode before splbio() pciide0: secondary channel ignored (not responding; disabled or no drives?) pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x00) ppb2 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x00) pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled satalink0 at pci3 dev 6 function 0: Silicon Image SATALink 3114 (rev. 0x02) satalink0: 33MHz PCI bus satalink0: bus-master DMA support present satalink0: using ioapic0 pin 21 for native-PCI interrupt atabus6 at satalink0 channel 0 atabus7 at satalink0 channel 1 atabus8 at satalink0 channel 2 atabus9 at satalink0 channel 3 re0 at pci3 dev 7 function 0: D-Link DGE-528T Gigabit Ethernet (rev. 0x10) re0: interrupting at ioapic0 pin 22 re0: Ethernet address 00:1c:f0:64:2d:7e re0: using 256 tx descriptors rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 3 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto ohci4 at pci0 dev 20 function 5: vendor 0x1002 product 0x4399 (rev. 0x00) ohci4: interrupting at ioapic0 pin 18 ohci4: OHCI version 1.0, legacy support usb6 at ohci4: USB revision 1.0 pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00) pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00) pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00) pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00) pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00) isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 before splbio() before splbio() acpicpu0 at cpu0: ACPI CPU acpicpu0: C1: HLT, lat 0 us, pow 0 mW acpicpu0: P0: FFH, lat 2 us, pow 23500 mW, 2200 MHz acpicpu0: P1: FFH, lat 2 us, pow 14280 mW, 1100 MHz acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 % acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 % acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 % acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 % acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 % acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 % acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 % acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 % acpicpu1 at cpu1: ACPI CPU acpicpu2 at cpu2: ACPI CPU acpicpu3 at cpu3: ACPI CPU timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 timecounter: Timecounter "TSC" frequency 2205849710 Hz quality 3000 satalink0: port 3: device present, speed: 1.5Gb/s satalink0: port 2: device present, speed: 1.5Gb/s uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered uhub1 at usb1: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered uhub2 at usb3: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 3 ports with 3 removable, self powered uhub3 at usb6: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 3 ports with 3 removable, self powered uhub5 at usb2: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 6 ports with 6 removable, self powered ahcisata0 port 2: device present, speed: 3.0Gb/s uhub6 at usb5: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub6: 6 ports with 6 removable, self powered IPsec: Initialized Security Association Processing. wd0 at atabus2 drive 0 wd0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd1 at atabus8 drive 0 wd1: wd1: drive supports 16-sector PIO transfers, LBA48 addressing wd1: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd1: 32-bit data port wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd1(satalink0:2:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) wd2 at atabus9 drive 0 wd2: wd2: drive supports 16-sector PIO transfers, LBA48 addressing wd2: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd2: 32-bit data port wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd2(satalink0:3:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) ehci0: handing over full speed device on port 1 to ohci0 ehci0: handing over full speed device on port 3 to ohci0 ubt0 at uhub0 port 1 ubt0: vendor 0x0a12 EDRClassone, rev 2.00/31.64, addr 2 uhub7 at uhub5 port 4: vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/7.02, addr 2 uhub7: single transaction translator uhub7: 4 ports with 4 removable, self powered uplcom0 at uhub7 port 3 uplcom0: Prolific Technology Inc. USB-Serial Controller, rev 1.10/3.00, addr 3 ucom0 at uplcom0 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio0 at pad0: half duplex, playback, capture raid0: RAID Level 1 raid0: Components: /dev/wd1a /dev/wd2a raid0: Total Sectors: 625142272 (305245 MB) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs wsdisplay0: screen 1 added (default, vt100 emulation) wsdisplay0: screen 2 added (default, vt100 emulation) wsdisplay0: screen 3 added (default, vt100 emulation) wsdisplay0: screen 4 added (default, vt100 emulation) bthub0 at ubt0 local-bdaddr 00:18:5d:01:17:ad bthidev0 at bthub0 remote-bdaddr 00:1f:5b:fc:ac:86 link-mode encrypt btkbd0 at bthidev0 reportid 1 wskbd1 at btkbd0 mux 1 wskbd1: connecting to wsdisplay0 bthidev0: reportid 9 not configured bthidev0: reportid 17 not configured bthidev0: reportid 18 not configured bthidev0: reportid 19 not configured bthidev0: reportid 71 not configured bthidev0: disconnected bthidev0: connected aibs0: warning under limit on 'Chassis FAN Speed' aibs0: warning under limit on 'Power Fan Speed'