The X Font Service Protocol Version 2.0 X Consortium Standard X Version 11, Release 6.4 Jim Fulton Network Computing Devices, Inc. Revised May 2, 1994 Copyright (C) 1991 Network Computing Devices, Inc. Permission to use, copy, modify, distribute, and sell this documentation for any purpose is hereby granted without fee, provided that the above copyright notice and this permission notice appear in all copies. Network Computing Devices, Inc. makes no representations about the suitability for any purpose of the information in this document. This documen- tation is provided ``as is'' without express or implied war- ranty. Copyright (C) 1994 X Consortium Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documenta- tion files (the ``Software''), to deal in the Software with- out restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the fol- lowing conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PUR- POSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSOR- TIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of the X Con- sortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium. 1. Introduction The management of fonts in large, heterogeneous environments is one of the hardest aspects of using the X Window System.* Multiple formats and the lack of a consistent mechanism for exporting font data to all displays on a network prevent the transparent use of applications across different display platforms. The X Font Service protocol is designed to address this and other issues, with specific emphasis on the needs of the core X protocol. Upward-compatible changes (typically in the form of new requests) are expected as con- sensus is reached on new features (particularly outline font support). Currently, most X displays use network file protocols such as NFS and TFTP to obtain raw font data which they parse directly. Since a common binary format for this data doesn't exist, displays must be able to interpret a variety of formats if they are to be used with different application hosts. This leads to wasted code and data space and a loss of interoperability as displays are used in unforeseen envi- ronments. By moving the interpretation of font data out of the X server into a separate service on the network, these prob- lems can be greatly reduced. In addition, new technologies, such as dynamically generating bitmaps from scaled or out- line fonts, can be provided to all displays transparently. For horizontal text, caching techniques and increased pro- cessor power can potentially make rasterization more effi- cient on large, centralized hosts than on individual dis- plays. Each font server provides sets of fonts that may be listed and queried for header, property, glyph extents, and bitmap information. This data is transmitted over the network using a binary format (with variations to support different bit- and byte-orders) designed to minimize the amount of processing required by the display. Since the font server, rather than the display, is responsible for parsing the raw font data, new formats can be used by all displays by modi- fying a single font server. From the user's point of view, font servers are simply a new type of name in the X font path. Network name services allow descriptive names (such as DEPARTMENT-FONTS or APPLI- CATION-FONTS) to be translated into proper network addresses. X displays send requests to and read replies from the font server rather than reading directly from files. Since the X Font Service protocol is designed to allow subsets of the font data to be requested, displays may ----------- * X Window System is a trademark of X Consortium, Inc. 1 X Font Service Protocol X11, Release 6.4 easily implement a variety of strategies for fine-grained demand-loading of glyphs. 2. Architectural Model In this document, the words ``client'' and ``server'' refer to the consumer and provider of a font, respectively, unless otherwise indicated. It is important to note that in this context, the X server is also a font client. The X Font Service protocol does not require any changes to the core X protocol or to any applications. To the user, font servers are simply additional types of font path ele- ments. As such, X servers may connect to multiple font servers, as shown in Figure 2.1. Although the font protocol is geared towards the X Window System, it may be also used by other consumers of font data (such as printer drivers). +--------+ +---------------+ | X1 |--------------| | | Server | | Font Server | +--------+ +-------| 1 | | +---------------+ +--------+ | | X2 |------+ +---------------+ | Server |--------------| | +--------+ | Font Server | +-------| 2 | +---------+ | +---------------+ | other | | | clients |------+ +---------+ Figure 2.1: Connecting to a Font Server Clients communicate with the font server using the request/reply/event model over any mutually-understood vir- tual stream connection (such as TCP/IP, DECnet,* etc.). Font servers are responsible for providing data in the bit and byte orders requested by the client. The set of requests and events provided in the first version of the X Font Service protocol is limited to supporting the needs of the bitmap-oriented core X Window System protocol. Exten- sions are expected as new needs evolve. A font server reads raw font data from a variety of sources (possibly including other font servers) and converts it into a common format that is transmitted to the client using the protocol described in Section 4. New font formats are han- dled by adding new converters to a font server, as shown in Figure 2.2. ----------- *DECnet is a trademark of Digital Equipment Corpo- ration. 2 X Font Service Protocol X11, Release 6.4 +------------+ | client | | (X server) | +------------+ | network | +--------------------------------------------+ | | | font server 1 | | | +-----+-----+-----+-----+----+-----+---+-----+ | bdf | snf | pcf | atm | f3 | dwf | | | ... | +-----+-----+-----+-----+----+-----+-|-+-----+ | network | +----------+ | font | | server 2 | +----------+ Figure 2.2: Where Font Data Comes From The server may choose to provide named sets of fonts called ``catalogues.'' Clients may specify which of the sets should be used in listing or opening a font. An event mechanism similar to that used in the X protocol is provided for asynchronous notification of clients by the server. Clients may provide authorization data for the server to be used in determining (according to the server's licensing policy) whether or not access should be granted to particu- lar fonts. This is particularly useful for clients whose authorization changes over time (such as an X server that can verify the identity of the user). Implementations that wish to provide additional requests or events may use the extension mechanism. Adding to the core font service protocol (with the accompanying change in the major or minor version numbers) is reserved to the X Consor- tium. 3. Font Server Naming Font clients that expose font server names to the user are encouraged to provide ways of naming font servers symboli- cally (e.g. DEPARTMENT-FONTS). However, for environments that lack appropriate name services transport-specific names are necessary. Since these names do occur in the protocol, clients and servers should support at least the applicable formats described below. Formats for additional transports 3 X Font Service Protocol X11, Release 6.4 may be registered with the X Consortium. 3.1. TCP/IP Names The following syntax should be used for TCP/IP names: ::= "tcp/" ":" ["/" ] where is either symbolic (such as expo.lcs.mit.edu) or numeric decimal (such as 18.30.0.212). The is the port on which the font server is listening for connections. The string at the end is optional and specifies a plus-separated list of catalogues that may be requested. For example: tcp/expo.lcs.mit.edu:8012/available+special tcp/18.30.0.212:7890 3.2. DECnet Names The following syntax should be used for DECnet names: ::= "decnet/" "::font$" ["/" ] where is either symbolic (such as SRVNOD) or the numeric decimal form of the DECnet address (such as 44.70). The is normal, case-insensitive DECnet object name. The string at the end is optional and specifies a plus-separated list of catalogues that may be requested. For example: DECNET/SRVNOD::FONT$DEFAULT/AVAILABLE decnet/44.70::font$other 4. Protocol The protocol described below uses the request/reply/error model and is specified using the same conventions outlined in Section 2 of the core X Window System protocol [1]: o Data type names are spelled in upper case with no word separators, as in: FONTID o Alternate values are capitalized with no word separa- tors, as in: MaxWidth o Structure element declarations are in lower case with hyphens as word separators, as in: byte-order-msb 4 X Font Service Protocol X11, Release 6.4 Note Structure element names are referred to in upper case (e.g. BYTE-ORDER-MSB) when used in descriptions to set them off from the sur- rounding text. When this document is typeset they will be printed in lower case in a dis- tinct font. o Type declarations have the form ``name: type'', as in: CARD8: 8-bit byte o Comma-separated lists of alternate values are enclosed in braces, as in: { Min, MaxWidth, Max } o Comma-separated lists of structure elements are enclosed in brackets, as in: [ byte1: CARD8, byte2: CARD8 ] A type with a prefix ``LISTof'' represents a counted list of elements of that type, as in: LISTofCARD8 4.1. Data Types The following data types are used in the core X Font Server protocol: ACCESSCONTEXT: ID This value is specified in the CreateAC request as the identifier to be used when referring to a particular AccessContext resource within the server. These resources are used by the server to store client-speci- fied authorization information. This information may be used by the server to determine whether or not the client should be granted access to particular font data. In order to preserve the integrity of font licensing being performed by the font server, care must be taken by a client to properly represent the identity of the true user of the font. Some font clients will in fact be servers (for example, X servers) requesting fonts for their own clients. Other font clients may be doing work on behalf of a number of different users over time (for example, print spoolers). AccessContexts must be created (with CreateAC) and switched among (with SetAuthorization) to represent all of these ``font users'' properly. ALTERNATESERVER: [ name: STRING8, subset: BOOL ] 5 X Font Service Protocol X11, Release 6.4 This structure specifies the NAME, encoded in ISO 8859-1 according to Section 3, of another font server that may be useful as a substitute for this font server. The SUBSET field indicates whether or not the alternate server is likely to only contain a subset of the fonts available from this font server. This infor- mation is returned during the initial connection setup and may be used by the client to find a backup server in case of failure. AUTH: [ name: STRING8, data: LISTofBYTE ] This structure specifies the name of an authorization protocol and initial data for that protocol. It is used in the authorization negotiation in the initial connection setup and in the CreateAC request. BITMAPFORMAT: CARD32 containing the following fields defined by the sets of values given further below [ byte-order-msb: 1 bit, bit-order-msb: 1 bit, image-rect: 2 bits { Min, MaxWidth, Max }, zero-pad: 4 bits, scanline-pad: 2 bits { ScanlinePad8, ScanlinePad16, ScanlinePad32, ScanlinePad64 }, zero-pad: 2 bits, scanline-unit: 2 bits { ScanlineUnit8, ScanlineUnit16, ScanlineUnit32, ScanlineUnit64 }, zero-pad: 2 bits, zero-pad: 16 bits, ] This structure specifies how glyph images are transmit- ted in response to QueryXBitmaps8 and QueryXBitmaps16 requests. If the BYTE-ORDER-MSB bit (1 << 0) is set, the Most Significant Byte of each scanline unit is returned first. Otherwise, the Least Significant Byte is returned first. If the BIT-ORDER-MSB bit (1 << 1) is set, the left-most bit in each glyph scanline unit is stored in the Most 6 X Font Service Protocol X11, Release 6.4 Significant Bit of each transmitted scanline unit. Otherwise, the left-most bit is stored in the Least Significant Bit. The IMAGE-RECT field specifies a rectangle of pixels within the glyph image. It contains one of the follow- ing alternate values: ImageRectMin (0 << 2) ImageRectMaxWidth (1 << 2) ImageRectMax (2 << 2) For a glyph with extents XCHARINFO in a font with header information XFONTINFO, the IMAGE-RECT values have the following meanings: ImageRectMin- This refers to the minimal bounding rectangle surrounding the inked pixels in the glyph. This is the most compact representation. The edges of the rectangle are: left: XCHARINFO.LBEARING right: XCHARINFO.RBEARING top: XCHARINFO.ASCENT bottom: XCHARINFO.DESCENT ImageRectMaxWidth- This refers to the scanlines between the glyph's ascent and descent, padded on the left to the minimum left-bearing (or 0, whichever is less) and on the right to the maximum right-bearing (or logical-width, whichever is greater). All glyph images share a common hori- zontal origin. This is a combination of ImageRectMax in the horizontal direction and ImageRectMin in the vertical direction. The edges of the rectangle are: left: min (XFONTINFO.MIN-BOUNDS.LBEARING, 0) right: max (XFONTINFO.MAX-BOUNDS.RBEARING, XFONTINFO.MAX-BOUNDS.WIDTH) top: XCHARINFO.ASCENT bottom: XCHARINFO.DESCENT ImageRectMax - This refers to all scanlines, from the maximum ascent (or the font ascent, whichever is greater) to the maximum descent (or the font descent, whichever is greater), padded to the same horizontal extents as MaxWidth. All glyph images have the same sized bitmap and share a common ori- gin. This is the least compact representation, but may be the easiest or most efficient 7 X Font Service Protocol X11, Release 6.4 (particularly for character cell fonts) for some clients to use. The edges of the rectangle are: left: min (XFONTINFO.MIN-BOUNDS.LBEARING, 0) right: max (XFONTINFO.MAX-BOUNDS.RBEARING, XFONTINFO.MAX-BOUNDS.WIDTH) top: max (XFONTINFO.FONT-ASCENT, XFONTINFO.MAX-BOUNDS.ASCENT) bottom: max (XFONTINFO.FONT-DESCENT, XFONTINFO.MAX-BOUNDS.DESCENT) The SCANLINE-PAD field specifies the number of bits (8, 16, 32, or 64) to which each glyph scan- line is padded before transmitting. It contains one of the following alternate values: ScanlinePad8 (0 << 8) ScanlinePad16 (1 << 8) ScanlinePad32 (2 << 8) ScanlinePad64 (3 << 8) The SCANLINE-UNIT field specifies the number of bits (8, 16, 32, or 64) that should be treated as a unit for swapping. This value must be less than or equal to the number of bits specified by the SCANLINE-PAD. It contains one of the following alternate values: ScanlineUnit8 (0 << 12) ScanlineUnit16 (1 << 12) ScanlineUnit32 (2 << 12) ScanlineUnit64 (3 << 12) BITMAPFORMATs are byte-swapped as CARD32s. All unspecified bits must be zero. Use of an invalid BITMAPFORMAT causes a Format error to be returned. BITMAPFORMATMASK: CARD32 mask This is a mask of bits representing the fields in a BITMAPFORMAT: ByteOrderMask (1 << 0) BitOrderMask (1 << 1) ImageRectMask (1 << 2) ScanlinePadMask (1 << 3) ScanlineUnitMask (1 << 4) Unspecified bits are required to be zero or else a For- mat error is returned. 8 X Font Service Protocol X11, Release 6.4 BOOL: CARD8 This is a boolean value containing one of the following alternate values: False 0 True 1 BYTE: 8-bit value This is an unsigned byte of data whose encoding is determined by the context in which it is used. CARD8: 8-bit unsigned integer CARD16: 16-bit unsigned integer CARD32: 32-bit unsigned integer These are unsigned numbers. The latter two are byte- swapped when the server and client have different byte orders. CHAR2B: [ byte1, byte2: CARD8 ] This structure specifies an individual character code within either a 2-dimensional matrix (using BYTE1 and BYTE2 as the row and column indices, respectively) or a vector (using BYTE1 and BYTE2 as most- and least-sig- nificant bytes, respectively). This data type is treated as a pair of 8-bit values and is never byte- swapped. Therefore, the client should always transmit BYTE1 first. EVENTMASK: CARD32 mask This is a mask of bits indicating which of an exten- sion's (or the core's) maskable events the client would like to receive. Each bit indicates one or more events, and a bit value of one indicates interest in a corresponding set of events. The following bits are defined for event masks specified for the core protocol (i.e. an EXTENSION-OPCODE of zero in SetEventMask and GetEventMask requests): 9 X Font Service Protocol X11, Release 6.4 CatalogueListChangeMask (1 << 0) FontListChangeMask (1 << 1) If CatalogueListChangeMask is set, client is interested in receiving CatalogueListNotify events. If FontListChangeMask is set, the client is interested in receiving FontListNotify events. Extensions that provide additional events may define their own event masks. These event masks have their own scope and may use the same bit values as the core or other extensions. All unused bits must be set to zero. In SetEventMask requests, if any bits are set that are not defined for the extension (or core) for which this EVENTMASK is intended (according to the EXTENSION- OPCODE given in the SetEventMask request), an EventMask error is gener- ated. This value is swapped as a CARD32. FONTID: ID This is specified by the client in the request Open- BitmapFont as the identifier to be used when referring to a particular open font. ID: CARD32 This is a 32-bit value in which the top 3 bits must be clear, and at least 1 other bit must be set (yielding a range of 1 through 2^29-1). It is specified by the client to represent objects in the server. Identifiers are scoped according to their type are private to the client; thus, the same identifier may be used for both a FONTID and an ACCESSCONTEXT as well as by multiple clients. An ID of zero is referred to as None. INT8: 8-bit signed integer INT16: 16-bit signed integer INT32: 32-bit signed integer These are signed numbers. The latter two are byte- swapped when the client and server have different byte orders. OFFSET32: [ position: CARD32, length: CARD32 ] 10 X Font Service Protocol X11, Release 6.4 This structure indicates a position and length within a block of data. PROPINFO: [ offsets: LISTofPROPOFFSET, data: LISTofBYTE ] This structure describes the list of properties pro- vided by a font. Strings for all of the properties names and values are stored within the data block and are located using a table of offsets and lengths. This structure is padded to 32-bit alignment. PROPOFFSET: [ name: OFFSET32, value: OFFSET32, type: CARD8, zero-pad3: BYTE, BYTE, BYTE ] This structure specifies the position, length, and type of of data for a property. The NAME field specifies the position and length (which must be greater than zero) of the property name rela- tive to the beginning of the PROPINFO.DATA block for this font. The interpretation of the position and length of the VALUE field is determined by the TYPE field, which contains one of the following alternate values: String 0 Unsigned 1 Signed 2 which have the following meanings: String This property contains a counted string of bytes. The data is stored in the PROPINFO.DATA block beginning at relative byte VALUE.POSITION (begin- ning with zero), extending for VALUE.LENGTH (at least zero) bytes. Unsigned This property contains a unsigned, 32-bit number stored as a CARD32 in VALUE.POSITION (VALUE.LENGTH is zero). Signed This property contains a signed, 32-bit number stored as an INT32 in VALUE.POSITION (VALUE.LENGTH is zero). This structure is zero-padded to 32-bit alignment. 11 X Font Service Protocol X11, Release 6.4 RANGE: [ min-char, max-char: CHAR2B ] This structure specifies a range of character codes. A single character is represented by MIN-CHAR equals MAX- CHAR. If the linear interpretation of MAX-CHAR is less than that of MIN-CHAR, or if MIN-CHAR is less than the font's XFONTINFO.CHAR-RANGE.MIN-CHAR, or if MAX-CHAR is greater than the font's XFONTINFO.CHAR-RANGE.MAX-CHAR, the range is invalid. RESOLUTION: [ x-resolution: CARD16, y-resolution: CARD16, decipoint-size: CARD16 ] This structure specifies resolution and point size to be used in resolving partially-specified scaled font names. The X-RESOLUTION and Y-RESOLUTION are measured in pixels-per-inch and must be greater than zero. The DECIPOINT-SIZE is the preferred font size, measured in tenths of a point, and must be greater than zero. STRING8: LISTofCARD8 This is a counted list of 1-byte character codes, typi- cally encoded in ISO 8859-1. A character code ``c'' is equivalent to a CHAR2B structure whose BYTE1 is zero and whose BYTE2 is ``c''. TIMESTAMP: CARD32 This is the number of milliseconds that have passed since a server- dependent origin. It is provided in errors and events and is permitted to wrap. XCHARINFO: [ lbearing, rbearing: INT16, width: INT16, ascent, descent: INT16, attributes: CARD16 ] This structure specifies the ink extents and horizontal escapement (also known as the set- or logical width) of an individual character. The first five values repre- sent directed distances in a coordinate system whose origin is aligned with the lower-left edge of the left- most pixel of the glyph baseline (i.e. the baseline falls between two pixels as shown in Figure 3-1 of the ``Bitmap Distribution Format 2.1'' Consortium standard [2]). The LBEARING field specifies the directed distance mea- sured to the right from the origin to the left edge of the left-most inked pixel in the glyph. The RBEARING field specifies the directed distance 12 X Font Service Protocol X11, Release 6.4 (measured to the right) from the origin to the right edge of the right-most inked pixel in the glyph. The WIDTH field specifies the directed distance (mea- sured to the right) from the origin to the position where the next character should appear (called the ``escapement point''). This distance includes any whitespace used for intercharacter padding and is also referred to as the ``logical width'' or ``horizontal escapement.'' The ASCENT field specifies the directed distance (mea- sured up) from the baseline to the top edge of the top- most inked pixel in the glyph. The DESCENT field specifies the directed distance (mea- sured down) from the baseline to the bottom edge of the bottom-most inked pixel. The ATTRIBUTES field specifies glyph-specific informa- tion that is passed through the application. If this value is not being used, it should be zero. The ink bounding box of a glyph is defined to be the smallest rectangle that encloses all of the inked pix- els. This box has a width of RBEARING - LBEARING pix- els and a height of ASCENT + DESCENT pixels. XFONTINFO: [ flags: CARD32, drawing-direction: { LeftToRight, RightToLeft } char-range: RANGE, default-char: CHAR2B, min-bounds: XCHARINFO, max-bounds: XCHARINFO, font-ascent: INT16, font-descent: INT16, properties: PROPINFO ] This structure specifies attributes related to the font as a whole. The FLAGS field is a bit mask containing zero or more of the following boolean values (unspecified bits must be zero): AllCharactersExist (1 << 0) InkInside (1 << 1) HorizontalOverlap (1 << 2) which have the following meanings: 13 X Font Service Protocol X11, Release 6.4 AllCharactersExist If this bit is set, all of the characters in the range given by CHAR-RANGE have glyphs encoded in the font. If this bit is clear, some of the char- acters may not have encoded glyphs. InkInside If this bit is set, the inked pixels of each glyph fall within the rectangle described by the font's ascent, descent, origin, and the glyph's escape- ment point. If this bit is clear, there may be glyphs whose ink extends outside this rectangle. HorizontalOverlap If this bit is set, the two ink bounding boxes (smallest rectangle enclosing the inked pixels) of some pairs of glyphs in the font may overlap when displayed side-by-side (i.e. the second character is imaged at the escapement point of the first) on a common baseline. If this bit is clear, there are no pairs of glyphs whose ink bounding boxes overlap. The DRAWING-DIRECTION field contains a hint indicating whether most of the character metrics have a positive (or ``LeftToRight'') logical width or a negative (``RightToLeft'') logical width. It contains the fol- lowing alternate values: LeftToRight 0 RightToLeft 1 The CHAR-RANGE.MIN-CHAR and CHAR-RANGE.MAX-CHAR fields specify the first and last character codes that have glyphs encoded in this font. All fonts must have at least one encoded glyph (in which case the MIN-CHAR and MAX-CHAR are equal), but are not required to have glyphs encoded at all positions between the first and last characters. The DEFAULT-CHAR field specifies the character code of the glyph that the client should substitute for unen- coded characters. Requests for extents or bitmaps for an unencoded character generate zero-filled metrics and a zero-length glyph bitmap, respectively. The MIN-BOUNDS and MAX-BOUNDS fields contain the mini- mum and maximum values of each of the extents field of all encoded characters in the font (i.e. non-existent characters are ignored). The FONT-ASCENT and FONT-DESCENT fields specify the font designer's logical height of the font, above and 14 X Font Service Protocol X11, Release 6.4 below the baseline, respectively. The sum of the two values is often used as the vertical line spacing of the font. Individual glyphs are permitted to have ascents and descents that are greater than these val- ues. The PROPERTIES field contains the property data associ- ated with this font. This structure is padded to 32-bit alignment. 4.2. Requests This section describes the requests that may be sent by the client and the replies or errors that are generated in response. Versions of the protocol with the same major ver- sion are required to be upward-compatible. Every request on a given connection is implicitly assigned a sequence number, starting with 1, that is used in replies, error, and events. Servers are required to generate replies and errors in the order in which the corresponding requests are received. Servers are permitted to add or remove fonts to the list visible to the client between any two requests, but requests must be processed atomically. Each request packet is at least 4 bytes long and contains the following fields: major-opcode: CARD8 minor-opcode: CARD8 length: CARD16 The MAJOR-OPCODE specifies which core request or extension package this packet represents. If the MAJOR-OPCODE corre- sponds to a core request, the MINOR-OPCODE contains 8 bits of request-specific data. Otherwise, the MINOR-OPCODE spec- ifies which extension request this packet represents. The LENGTH field specifies the number of 4-byte units contained within the packet and must be at least one. If this field contains a value greater than one it is followed by (LENGTH - 1) * 4 bytes of request-specific data. Unless otherwise specified, unused bytes are not required to be zero. If a request packet contains too little or too much data, the server returns a Length error. If the server runs out of internal resources (such as memory) while processing a request, it returns an Alloc error. If a server is defi- cient (and therefore non-compliant) and is unable to process a request, it may return an Implementation error. If a client uses an extension request without previously having issued a QueryExtension request for that extension, the server responds with a Request error. If the server encoun- ters a request with an unknown MAJOR-OPCODE or MINOR-OPCODE, it responds with a Request error. At most one error is 15 X Font Service Protocol X11, Release 6.4 generated per request. If more than one error condition is encountered in processing a requests, the choice of which error is returned is server-dependent. Core requests have MAJOR-OPCODE values between 0 and 127, inclusive. Extension requests have MAJOR-OPCODE values between 128 and 255, inclusive, that are assigned by by the server. All MINOR-OPCODE values in extension requests are between 0 and 255, inclusive. Each reply is at least 8 bytes long and contains the follow- ing fields: type: CARD8 value of 0 data-or-unused: CARD8 sequence-number: CARD16 length: CARD32 The TYPE field has a value of zero. The DATA-OR-UNUSED field may be used to encode one byte of reply-specific data (see Section 5.2 on request encoding). The least-signifi- cant 16 bits of the sequence number of the request that gen- erated the reply are stored in the SEQUENCE-NUMBER field. The LENGTH field specifies the number of 4-byte units in this reply packet, including the fields described above, and must be at least two. If LENGTH is greater than two, the fields described above are followed by (LENGTH - 2) * 4 bytes of additional data. Requests that have replies are described using the following syntax: RequestName arg1: type1 arg2: type2 ... argN: typeN => result1: type1 result2: type2 ... resultM: typeM Errors: kind1, kind2 ..., kindK Description If a request does not generate a reply, the``=>'' and result lines are omitted. If a request may generate multiple replies, the ``=>'' is replaced by a ``=>+''. In the autho- rization data exchanges in the initial connection setup and the CreateAC request, ``->'' indicates data sent by the 16 X Font Service Protocol X11, Release 6.4 client in response to data sent by the server. The protocol begins with the establishment of a connection over a mutually-understood virtual stream: open connection byte-order: BYTE client-major-protocol-version: CARD16 client-minor-protocol-version: CARD16 authorization-protocols: LISTofAUTH The initial byte of the connection specifies the BYTE-ORDER in which subsequent 16-bit and 32-bit numeric values are to be transmitted. The octal value 102 (ASCII uppercase `B') indicates that the most-significant byte is to be transmit- ted first; the octal value 154 (ASCII lowercase `l') indi- cates that the least-significant byte is to be transmitted first. If any other value is encountered the server closes the connection without any response. The CLIENT-MAJOR-PROTOCOL-VERSION and CLIENT-MINOR-PRO- TOCOL-VERSION specify which version of the font service protocol the client would like to use. If the client can support multiple versions, the highest version should be given. This version of the protocol has a major version of 2 and a minor version of 0. The AUTHORIZATION-PROTOCOLS contains a list of protocol names and optional initial data for which the client can provide information. The server may use this to determine which protocol to use or as part of the ini- tial exchange of authorization data. => status: { Success, Continue, Busy, Denied } server-major-protocol-version: CARD16 server-minor-protocol-version: CARD16 alternate-servers-hint: LISTofALTERNATESERVER authorization-index: CARD8 authorization-data: LISTofBYTE The SERVER-MAJOR-PROTOCOL-VERSION and SERVER-MINOR-PRO- TOCOL-VERSION specify the version of the font service protocol that the server expects from the client. If the server supports the version specified by the client, this version number should be returned. If the client has requested a higher version than is supported by the server, the server's highest version should be returned. Otherwise, if the client has requested a lower version than is supported by the server, the server's lowest version should be returned. It is the client's responsibility to decide whether or not it can 17 X Font Service Protocol X11, Release 6.4 match this version of the protocol. The ALTERNATE-SERVERS-HINT is a list of other font servers that may have related sets of fonts (determined by means outside this protocol, typically by the system administrator). Clients may choose to contact these font servers if the connection is rejected or lost. The STATUS field indicates whether the server accepted, rejected, or would like more information about the con- nection. It has one of the following alternate values: Success 0 Continue 1 Busy 2 Denied 3 If STATUS is Denied, the server has rejected the client's authorization information. If STATUS is Busy, the server has simply decided that it cannot provide fonts to this client at this time (it may be able to at a later time). In both cases, AUTHORIZATION-INDEX is set to zero, no authorization-data is returned, and the server closes the connection after sending the data described so far. Otherwise the AUTHORIZATION-INDEX is set to the index (beginning with 1) into the AUTHORIZATION-PROTOCOLS list of the protocol that the server will use for this connection. If the server does not want to use any of the given protocols, this value is set to zero. The AUTHORIZATION-DATA field is used to send back autho- rization protocol-dependent data to the client (such as a challenge, authentication of the server, etc.). If STATUS is Success, the following section of protocol is omitted. Otherwise, if STATUS is Continue, the server expects more authorization data from the client (i.e. the connection setup is not finished, so no requests or events may be sent): -> more-authorization-data: STRING8 => status: { Success, Continue, Busy, Denied } more-authorization-data: LISTofBYTE The values in STATUS have the same meanings as described above. This section of protocol is repeated until the server either accepts (sets STATUS to Success) or rejects (sets STATUS to Denied or Busy) the connection. 18 X Font Service Protocol X11, Release 6.4 Once the connection has been accepted and STATUS is Success, an implicit AccessContext is created for the authorization data and the protocol continues with the following data sent from the server: => remaining-length: CARD32 maximum-request-length: CARD16 release-number: CARD32 vendor: STRING8 The REMAINING-LENGTH specifies the length in 4-byte units of the remaining data to be transmitted to the client. The MAXIMUM-REQUEST-LENGTH specifies the largest request size in 4-byte units that is accepted by the server and must have a value of at least 4096. Requests with a length field larger than this value are ignored and a Length error is returned. The VENDOR string specifies the name of the manufacturer of the font server. The RELEASE-NUMBER specifies the particu- lar release of the server in a manufacturer-dependent man- ner. After the connection is established and the setup informa- tion has been exchanged, the client may issue any of requests described below: NoOp Errors: Alloc This request does nothing. It is typically used in response to a KeepAlive event. ListExtensions => names: LISTofSTRING8 Errors: Alloc This request returns the names of the extension pack- ages that are supported by the server. Extension names are case-sensitive and are encoded in ISO 8859-1. QueryExtension name: STRING8 => present: BOOL major-version: CARD16 minor-version: CARD16 19 X Font Service Protocol X11, Release 6.4 major-opcode: CARD8 first-event: CARD8 number-events: CARD8 first-error: CARD8 number-errors: CARD8 Errors: Alloc This request determines whether or not the extension package specified by NAME (encoded in ISO 8859-1) is supported by the server and that there is sufficient number of major opcode, event, and error codes avail- able. If so, then PRESENT is set to True, MAJOR-VER- SION and MINOR-VERSION are set to the respective major and minor version numbers of the protocol that the server would prefer; MAJOR-OPCODE is set to the value to use in extension requests; FIRST-EVENT is set to the value of the first extension-specific event code or zero if the extension does not have any events; NUMBER- EVENTS is set to the number of new events that the event defines; FIRST-ERROR is set to the value of the first extension-specific error code or zero if the extension does not define any new errors; and NUMBER- ERRORS is set to the number of new errors the extension defines. Otherwise, PRESENT is set to False and the remaining fields are set to zero. The server is free to return different values to dif- ferent clients. Therefore, clients must use this request before issuing any of the requests in the named extension package or using the SetEventMaskrequest this extension's events. Otherwise, a Request error is returned. ListCatalogues pattern: STRING8 max-names: CARD32 =>+ replies-following-hint: CARD32 names: LISTofSTRING8 Errors: Alloc This request returns a list of at most MAX-NAMES names of collections (called catalogues) of fonts that match the specified PATTERN. In the pattern (which is encoded in ISO 8859-1), the `?' character (octal 77) matches any single character; the `*' character (octal 52) matches any series of zero or more characters; and alphabetic characters match either upper- or lowercase. 20 X Font Service Protocol X11, Release 6.4 The returned NAMES are encoded in ISO 8859-1 and may contain mixed character cases. If PATTERN is of zero length or MAX-NAMES is equal to zero, one reply containing a zero-length list of names is returned. This may be used to synchronize the client with the server. Servers are free to add or remove catalogues to the set returned by ListCatalogues between any two requests. This request is not cumulative; repeated uses are pro- cessed in isolation and do result in an iteration through the list. To reduce the amount of buffering needed by the server, the list of names may be split across several reply packets, so long as the names arrive in the same order that they would have appeared had they been in a single packet. The REPLIES-FOLLOWING-HINT field in all but the last reply contains a positive value that specifies the number of replies that are likely, but not required, to follow. In the last reply, which may con- tain zero or more names, this field is set to zero. SetCatalogues names: LISTofSTRING8 Errors: Alloc, Name This request sets the list of catalogues whose fonts should be visible to the client. The union of the fonts provided by each of the named catalogues forms the set of fonts whose names match patterns in List- Fonts, ListFontsWithXInfo, and OpenBitmapFont requests. The catalogue names are case-insensitive and are encoded in ISO 8859-1. A zero-length list resets the client's catalogue list to the server-dependent default. If any of the catalogue names are invalid, a Name error is returned and the request is ignored. GetCatalogues => names: LISTofSTRING8 Errors: Alloc This request returns the current list of catalogue names (encoded in ISO 8859-1) associated with the client. These catalogues determine the set of fonts 21 X Font Service Protocol X11, Release 6.4 that are visible to ListFonts, ListFontsWithXInfo, and OpenBitmapFont. A zero-length list indicates the server's default set of fonts. Catalogue names are case-insensitive and may be returned in mixed case. SetEventMask extension-opcode: CARD8 event-mask: EVENTMASK Errors: EventMask, Request This request specifies the set of maskable events that the extension indicated by EXTENSION-OPCODE (or zero for the core) should generate for the client. Event masks are limited in scope to the extension (or core) for which they are defined, so expressing interest in events from one or more extensions requires multiple uses of this request. The default event mask if SetEventMask has not been called is zero, indicating no interest in any maskable events. Some events are not maskable and cannot be blocked. If EXTENSION-OPCODE is not a valid extension opcode previously returned by QueryExtension or zero, a Request error is returned. If EVENT-MASK contains any bits that do not correspond to valid events for the specified extension (or core), an EventMask error is returned and the request is ignored. GetEventMask extension-opcode: CARD8 => event-mask: EVENTMASK Errors: Request This request returns the set of maskable core events the extension indicated by EXTENSION-OPCODE (or the core if zero) should generate for the client. Non- maskable events are always sent to the client. If EXTENSION-OPCODE is not a valid extension opcode previously returned by QueryExtension or zero, a Request error is returned. CreateAC 22 X Font Service Protocol X11, Release 6.4 ac: ACCESSCONTEXT authorization-protocols: LISTofAUTH => status: { Success, Continue, Denied } authorization-index: CARD8 authorization-data: LISTofBYTE Errors: IDChoice This request creates a new AccessContext object within the server containing the specified authorization data. When this AccessContext is selected by the client using the SetAuthorization request, the data may be used by the server to determine whether or not the client should be granted access to particular font informa- tion. If STATUS is Denied, the server rejects the client's authorization information and does not associate AC with any valid AccessContext. In this case, AUTHORIZA- TION-INDEX is set to zero, and zero bytes of AUTHORIZA- TION-DATA is returned. Otherwise, AUTHORIZATION-INDEX is set to the index (beginning with 1) into the AUTHORIZATION-PROTOCOLS list of the protocol that the server will use for this connection. If the server does not want to use any of the given protocols, this value is set to zero. The AUTHORIZATION-DATA field is used to send back autho- rization protocol-dependent data to the client (such as a challenge, authentication of the server, etc.). If STATUS is Continue, the client is expected to con- tinue the request by sending the following protocol and receiving the indicated response from the server. This continues until STATUS is set to either Success or Denied. -> more-authorization-data: STRING8 => status: { Success, Continue, Denied } more-authorization-data: LISTofBYTE Once the connection has been accepted and STATUS is Success, the request is complete. If AC is not in the range [1..2^29-1] or is already associated with an access context, an IDChoice error is returned. 23 X Font Service Protocol X11, Release 6.4 FreeAC ac: ACCESSCONTEXT Errors: AccessContext, Alloc This request indicates that the specified AC should no longer be associated with a valid access context. If AC is also the current AccessContext (as set by the SetAuthorization request), an implicit SetAuthorization of None is done to restore the AccessContext estab- lished for the initial connection setup. Operations on fonts that were opened under AC are not affected. The client may reuse the value of AC in a subsequent Cre- ateAC request. If AC isn't associated with any valid authorization previously created by CreateAC, AccessContext error is returned. SetAuthorization ac: ACCESSCONTEXT Errors: AccessContext This request sets the AccessContext to be used for sub- sequent requests (except for QueryXInfo, QueryXEx- tents8, QueryXExtents16, QueryXBitmaps8, QueryXBitmaps16, and CloseFont which are done under the AccessContext of the corresponding OpenBitmapFont). An AC of None restores the AccessContext established for the initial connection setup. If AC is neither None nor a value associated with a valid AccessContext previously created by CreateAC, an AccessContext error is returned. SetResolution resolutions: LISTofRESOLUTION Errors: Resolution, Alloc This request provides a hint as to the resolution and preferred point size of the drawing surfaces for which the client will be requesting fonts. The server may use this information to set the RESOLUTION_X and RESO- LUTION_Y fields of scalable XLFD font names, to order sets of names based on their resolutions, and to choose the server-dependent instance that is used when a par- tially-specified scalable fontname is opened. If a zero-length list of RESOLUTIONS is given, the 24 X Font Service Protocol X11, Release 6.4 server-dependent default value is restored. Otherwise, if elements of all of the specified RESOLUTIONS are non-zero, the default resolutions for this client are changed. If a RESOLUTION entry contains a zero, a Resolution error is returned and the default resolutions are not changed. GetResolution => resolutions: LISTofRESOLUTION Errors: Alloc This request returns the current list of default reso- lutions. If a client has not performed a SetResolu- tion, a server-dependent default value is returned. ListFonts pattern: STRING8 max-names: CARD32 =>+ replies-following-hint: CARD32 names: LISTofSTRING8 Errors: Alloc This request returns a list of at most MAX-NAMES font names that match the specified PATTERN, according to matching rules of the X Logical Font Description Con- ventions [3]. In the pattern (which is encoded in ISO 8859-1) the `?' character (octal 77) matches any single character; the `*' character (octal 52) matches any series of zero or more characters; and alphabetic char- acters match either upper- or lowercase. The returned NAMES are encoded in ISO 8859-1 and may contain mixed character cases. Font names are not required to be in XLFD format. If PATTERN is of zero length or MAX-NAMES is equal to zero, one reply containing a zero-length list of names is returned. This may be used to synchronize the client with the server. Servers are free to add or remove fonts to the set returned by ListFonts between any two requests. This request is not cumulative; repeated uses are processed in isolation and do result in an iteration through the list. 25 X Font Service Protocol X11, Release 6.4 To reduce the amount of buffering needed by the server, the list of names may be split across several reply packets, so long as the names arrive in the same order that they would have appeared had they been in a single packet. The REPLIES-FOLLOWING-HINT field in all but the last reply contains a positive value that specifies the number of replies that are likely, but not required, to follow. In the last reply, which may con- tain zero or more names, this field is set to zero. ListFontsWithXInfo pattern: STRING8 max-names: CARD32 =>+ replies-following-hint: CARD32 info: XFONTINFO name: STRING8 Errors: Alloc This request is similar to ListFonts except that a sep- arate reply containing the name, header, and property data is generated for each matching font name. Follow- ing these replies, if any, a final reply containing a zero-length NAME and no INFO is sent. The REPLIES-FOLLOWING-HINT field in all but the last reply contains a positive value that specifies the num- ber of replies that are likely, but not required, to follow. In the last reply, this field is set to zero. If PATTERN is of zero length or if MAX-NAMES is equal to zero, only the final reply containing a zero-length NAME and no INFO is returned. This may be used to syn- chronize the client with the server. OpenBitmapFont fontid: FONTID pattern: STRING8 format-mask: BITMAPFORMATMASK format-hint: BITMAPFORMAT => otherid: FONTID or None otherid-valid: BOOL cachable: BOOL Errors: IDChoice, Name, Format, AccessContext, Alloc 26 X Font Service Protocol X11, Release 6.4 This request looks for a server-dependent choice of the font names that match the specified PATTERN according to the rules described for ListFonts. If no matches are found, a Name error is returned. Otherwise, the server attempts to open the font associated with the chosen name. Permission to access the font is determined by the server according the licensing policy used for this font. The server may use the client's current Access- Context (as set by the most recent SetAuthorization request or the original connection setup) to determine any client-specific sets of permissions. After the font has been opened, the client is allowed to specify a new AccessContext with SetAuthorization or release the AccessContext using FreeAC. QueryXInfo, QueryXEx- tents8, QueryXExtents16, QueryXBitmaps8, QueryXBitmaps16, CloseFont requests on this FONTID are performed according to permissions granted at the time of the OpenBitmapFont request. If the server is willing and able to detect that the client has already opened the font successfully (possi- bly under a different name), the OTHERID field may be set to one of the identifiers previously used to open the font. The OTHERID-VALID field indicates whether or not OTHERID is still associated with an open font: if it is True, the client may use OTHERID as an alterna- tive to FONTID. Otherwise, if OTHERID-VALID is False, OTHERID is no longer open but has not been reused by a subsequent OpenBitmapFont request. If OTHERID is set to None, then OTHERID-VALID should be set to False. The FORMAT-MASK indicates which fields in FORMAT-HINT the client is likely to use in subsequent GetXBitmaps8 and GetXBitmaps16 requests. Servers may wish to use this information to precompute certain values. If CACHABLE is set to True, the client may cache the font (so that redundant opens of the same font may be avoided) and use it with all AccessContexts during the life of the client without violating the font's licens- ing policy. This flag is typically set whenever a font is unlicensed or is licensed on a per-display basis. If CACHABLE is False, the client should reopen the font for each AccessContext. The server is permitted to add to or remove from the set of fonts returned by ListFonts between any two requests, though mechanisms outside the protocol. Therefore, it is possible for this request (which is atomic) to return a different font than would result 27 X Font Service Protocol X11, Release 6.4 from separate a ListFonts followed by an OpenBitmapFont with a non-wildcarded font name. If FONTID is not in the range [1..2^29-1] or if it is already associated with an open font, an IDChoice error is returned. If no font is available that matches the specified PATTERN, a Name error is returned. If the font is present but the client is not permitted access, an AccessContext error is returned. If FORMAT-MASK has any unspecified bits set or if any of the fields in FORMAT-HINT indicated by FORMAT-MASK are invalid, a Format error is returned. QueryXInfo fontid: FONTID => info: XFONTINFO Errors: Font, Alloc This request returns the font header and property information for the open font associated with FONTID. If FONTID is not associated with any open fonts, a Font error is returned. QueryXExtents8 fontid: FONTID range: BOOL chars: STRING8 => extents: LISTofXCHARINFO Errors: Font, Range, Alloc This request is equivalent to QueryXExtents16 except that it uses 1-byte character codes. QueryXExtents16 fontid: FONTID range: BOOL chars: LISTofCHAR2B => extents: LISTofXCHARINFO 28 X Font Service Protocol X11, Release 6.4 Errors: Font, Range, Alloc This request returns a list of glyph extents from the open font associated with FONTID for the series of characters specified by RANGE and CHARS. If RANGE is True, each succeeding pair of elements in CHARS is treated as a range of characters for which extents should be returned. If CHARS contains an odd number of elements, the font's XFONTINFO.CHAR- RANGE.MAX-CHAR is implicitly appended to the list. If CHARS contains no elements, the list is implicitly replaced with the font's XFONTINFO.CHAR-RANGE. If any of the resulting character ranges are invalid, a Range error is returned. Otherwise, the character ranges are concatenated in the order given by CHARS to produce a set of character codes for which extents are returned. If RANGE is False, then CHARS specifies the set of character codes for which extents are returned. If CHARS is of zero length, then a zero-length list of extents is returned. The extents for each character code in the resulting set (which may contain duplicates) are returned in the order in which the character codes appear in the set. At least one metric for each character shall be non- zero unless the character is not encoded in the font, in which case all-zero metrics are returned. A blank, zero-width character can be encoded with non-zero but equal left and right bearings. If FONTID is not associated with any open fonts, a Font error is returned. If RANGE is True and CHARS contains any invalid ranges, a Range error is returned. QueryXBitmaps8 fontid: FONTID range: BOOL chars: STRING8 format: BITMAPFORMAT =>+ replies-following-hint: CARD32 offsets: LISTofOFFSET32 bitmaps: LISTofBYTE Errors: Font, Range, Format, Alloc This request is equivalent to QueryXBitmaps16 except that it uses 1-byte character codes. 29 X Font Service Protocol X11, Release 6.4 QueryXBitmaps16 fontid: FONTID range: BOOL chars: LISTofCHAR2B format: BITMAPFORMAT =>+ replies-following-hint: CARD32 offsets: LISTofOFFSET32 bitmaps: LISTofBYTE Errors: Font, Range, Format, Alloc This request returns a list of glyph bitmaps from the open font associated with FONTID for the series of characters specified by RANGE and CHARS. If RANGE is True, each succeeding pair of elements in CHARS is treated as a range of characters for which bitmaps should be returned. If CHARS contains an odd number of elements, the font's XFONTINFO.CHAR- RANGE.MAX-CHAR is implicitly appended to the list. If CHARS contains no elements, the list is implicitly replaced with the font's XFONTINFO.CHAR-RANGE. If any of the resulting character ranges are invalid, a Range error is returned. Otherwise, the character ranges are concatenated in the order given by CHARS to produce a set of character codes for which bitmaps are returned. If RANGE is False, then CHARS specifies the set of character codes for which bitmaps are returned. If CHARS is of zero length, then a single reply containing a zero-length list of offsets and bitmaps is returned. If any of the resulting character ranges are invalid, a Range error is returned. Otherwise, the resulting character ranges are concatenated in the order given by CHARS to produce a set of character codes for which bitmaps are returned. The server is free to return the glyph bitmaps in mul- tiple replies to reduce the amount of buffering that is necessary. In this situation, the set of characters obtained above is partitioned into an implementation- dependent number of ordered, non-overlapping subsets containing runs of one or more consecutive characters. The global ordering of characters must be maintained such that concatenating the subsets in order that they were produced yields the original set. A reply is gen- erated for each subset, in the order that it was pro- duced. 30 X Font Service Protocol X11, Release 6.4 For each character in a subset, an image of that char- acter's glyph is described by a rectangle of bits cor- responding to the pixels specified by FORMAT.IMAGE- RECT. Within the image, set and clear bits represent inked and non-inked pixels, respectively. Each scanline of a glyph image, from top to bottom, is zero-padded on the right to a multiple of the number of bits specified by FORMAT.SCANLINE-PAD. The scanline is then divided from left to right into a sequence of FOR- MAT.SCANLINE-UNIT bits. The bits of each unit are then arranged such that the left-most pixel is stored in the most- or least-significant bit, according to FOR- MAT.BIT-ORDER-MSB. The bytes of each unit are then arranged such that the most- or least-significant byte, according to FORMAT.BYTE-ORDER-MSB, is transmitted first. Finally, the units are arranged such that the left-most is transmitted first and the right-most is transmitted last. The individual images within a subset are then concate- nated in a server-dependent order to form the BITMAPS data of the reply. If a glyph image is duplicated within a reply, the server is free to return fewer (but at least one) copies of the image. If a character is not encoded within the font, a zero-length bitmap is substituted for this character. Each glyph image must begin at a bit position that is a multiple of the FOR- MAT.SCANLINE-UNIT. The OFFSETS array in a reply contains one entry for each character in the subset being returned, in the order that the characters appear in the subset. Each entry specifies the starting location in bytes and size in bytes of the corresponding glyph image in the BITMAPS data of that reply (i.e. an offset may not refer to data in another reply). The REPLIES-FOLLOWING-HINT field in all but the last reply contains a positive value that specifies the num- ber of replies that are likely, but not required, to follow. In the last reply, which may contain data for zero or more characters, this field is set to zero. If FONTID is not associated with any open fonts, a Font error is returned. If RANGE is True and CHARS contains any invalid ranges, a Range error is returned. If FOR- MAT is invalid, a Format error is returned. CloseFont fontid: FONTID 31 X Font Service Protocol X11, Release 6.4 Errors: Font, Alloc This request indicates that the specified FONTID should no longer be associated with an open font. The server is free to release any client-specific storage or licenses allocated for the font. The client may reuse the value of FONTID in a subsequent OpenBitmapFont request. If FONTID is not associated with any open fonts, a Font error is returned. close connection When a connection is closed, a CloseFont is done on all fonts that are open on the connection. In addition, the server is free to release any storage or licenses allocated on behalf of the client that made the connec- tion. 4.3. Errors All errors are at least 16 bytes long and contain the fol- lowing fields: type: CARD8 value of 1 error-code: CARD8 sequence-number: CARD16 length: CARD32 timestamp: TIMESTAMP major-opcode: CARD8 minor-opcode: CARD8 data-or-unused: CARD16 The TYPE field has a value of one. The ERROR-CODE field specifies which error occurred. Core errors codes are in the range 0 through 127, extension error codes are in the range 128 through 255. The SEQUENCE-NUMBER field contains the least significant 16 bits of the sequence number of the request that caused the error. The LENGTH field specifies the length of the error packet in 4-byte units and must have a value of at least 4. The TIMESTAMP specifies the server time when the error occurred. The MAJOR-OPCODE and MINOR- OPCODE (zero for core requests) fields specify the type of request that generated the error. The DATA-OR-UNUSED field may be used for 16 bits of error-specific information. If LENGTH is greater than four, these fields are followed by (LENGTH - 4) * 4 bytes of extra data. The following errors are defined for the core protocol: Request 32 X Font Service Protocol X11, Release 6.4 data-or-unused: CARD16 unused This error is generated by any request that has an unknown combination of major and minor request numbers, or by any extension request that is issued before a QueryExtension of that extension. Format data-or-unused: CARD16 unused format: BITMAPFORMAT bad format value This error is generated by the use of an invalid BITMAPFORMAT in the OpenBitmapFont, QueryXBitmaps8, and QueryXBitmaps16 requests. The value that caused the error is included as extra data. Font data-or-unused: CARD16 unused fontid: FONTID bad font identifier This error is generated by an invalid FONTID in the QueryXInfo, QueryXExtents8, QueryXExtents16, QueryXBitmaps8, QueryXBitmaps16, and CloseFont requests. The value that caused the error is included as extra data. Range data-or-unused: CARD16 unused range: RANGE bad range This error is generated by an invalid RANGE in the QueryXExtents8, QueryXExtents16, QueryXBitmaps8, QueryXBitmaps16 requests. The value that caused the error is included as extra data. EventMask data-or-unused: CARD16 unused event-mask: EVENTMASK bad event mask This error is generated by an invalid EVENTMASK in the SetEventMask request. The value that caused the error is included as extra data. AccessContext data-or-unused: CARD16 unused ac: ACCESSCONTEXT unaccepted AccessContext This error is generated by an invalid ACCESSCONTEXT in the FreeAC or SetAuthorization request or by an 33 X Font Service Protocol X11, Release 6.4 OpenBitmapFont request performed without sufficient authorization. In the first two cases, the ACCESSCON- TEXT of the errant request is returned as extra data. In the third case, the current ACCESSCONTEXT is returned as extra data. IDChoice data-or-unused: CARD16 unused id: ID bad identifier This error is generated by an invalid or already asso- ciated ACCESSCONTEXT identifier in a CreateAC request or FONTID identifier in an OpenBitmapFont request. The value that caused the error is included as extra data. Name data-or-unused: CARD16 unused This error is generated by a font name pattern that matches no fonts in an OpenBitmapFont request or no catalogue names in a SetCatalogues request. Resolution data-or-unused: CARD16 X value of errant resolution y-resolution: CARD16 Y value of errant resolu- tion point-size: CARD16 point size of errant resolu- tion This error is generated in response to an invalid RESO- LUTION structure in a SetResolution request. The value that caused the error is included in the DATA-OR-UNUSED field and as extra data. Alloc data-or-unused: CARD16 unused This error is generated by any request for which the server lacks sufficient resources (especially memory). Length data-or-unused: CARD16 unused length: CARD32 bad length value This error is generated by any request that has a length field greater than (MAXIMUM-REQUEST-LENGTH * 4) bytes. The value that caused the error is included as extra data. 34 X Font Service Protocol X11, Release 6.4 Implementation data-or-unused: CARD16 unused This error may be generated in response to any request that the server is unable to process because it is deficient. Use of this error is highly discouraged and indicates lack of conformance to the protocol. Additional errors may be defined by extensions. 4.4. Events Events may be generated in response to requests or at the server's discretion after the initial connection setup information has been exchanged. Each event is at least 12 bytes long and contains the following fields: type: CARD8 value of 2 event-code: CARD8 sequence-number: CARD16 length: CARD32 timestamp: TIMESTAMP The TYPE field contains the value 2. The EVENT-CODE field specifies the number of the event and is in the range 0-127 for core events or the range 128-255 for extensions. The SEQUENCE-NUMBER field specifies the least significant 16 bits of the sequence number of the last request to have been processed by the server. The LENGTH field specifies the number of 4-byte units in this event packet and must always have a value of at least 3. The TIMESTAMP field specifies the server time when the event occurred. If LENGTH is greater than three, these fields are followed by (LENGTH - 3) * 4 bytes of additional data. Events are described using the following syntax: EventName arg1: type1 ... argN: typeN Description If an event does not provide any extra arguments, the arg1...argN lines are omitted from the description. The core X Font Service protocol defines the following events: KeepAlive 35 X Font Service Protocol X11, Release 6.4 This unsolicited, nonmaskable event may be sent by the server to verify that the connection has not been bro- ken (for transports that do not provide this informa- tion). Clients should acknowledge receipt of this request by sending any request (such as NoOp). CatalogueListNotify added: BOOL deleted: BOOL This event is sent to clients that have included Cata- logueListChangeMask in their core event mask whenever the list of catalogues that are available has changed. The ADDED field is True if new catalogues have been added to the server, otherwise it is False. The DELETED field is True if any existing catalogues have been removed from the server, otherwise it is False. FontListNotify added: BOOL deleted: BOOL This event is sent to clients that have included FontListChangeMask in their event mask whenever the list of fonts that are provided by the currently selected catalogues has changed. The ADDED field is True if new fonts have been added to any of the cata- logues currently used by the client, otherwise it is False. The DELETED field is True if any existing fonts have been removed from any of catalogues used by the client, otherwise it is False. Additional events may be defined by extensions. 5. Protocol Encoding Numbers that are prefixed with ``#x'' are in hexadecimal (base 16). All other numbers are in decimal. Requests, replies, errors, events, and compound types are described using the syntax: Name count contents name ... count contents name where COUNT is the number of bytes in the data stream occu- pied by this field, CONTENTS is the name of the type as given in Section 4 or the value if this field contains a constant, and NAME is a description of this field. 36 X Font Service Protocol X11, Release 6.4 Objects containing counted lists use a lowercase single-let- ter variable (whose scope is limited to the request, reply, event, or error in which it is found) to represent the num- ber of objects in the list. These variables, and any expressions in which they are used, should be treated as unsigned integers. Multiple copies of an object are indi- cated by CONTENTS prefix ``LISTof''. Unused bytes (whose value is undefined) will have a blank CONTENTS field and a NAME field of ``unused''. Zeroed bytes (whose value must be zero) will have a blank CONTENTS field and a NAME field of ``zero''. The expression pad(e) refers to the number of bytes needed to round a value ``e'' up to the closed multiple of four: pad(e) = (4 - (e mod 4)) mod 4 5.1. Data Types ACCESSCONTEXT 4 CARD32 access context with at least one of the fol- lowing bits set: #x1fffffff but none of the following bits set: #xe0000000 zero ALTERNATESERVER 1 BOOL subset 1 n length of name n STRING8 name p unused, p=pad(n+2) AUTH 2 n length of name 2 d length of data n STRING8 name p unused, p=pad(n) d STRING8 data q unused, q=pad(d) BITMAPFORMAT 4 CARD32 value, union of the following bits: #x00000001 ByteOrderMSB #x00000002 BitOrderMSB #x00000000 ImageRectMin 37 X Font Service Protocol X11, Release 6.4 #x00000004 ImageRectMaxWidth #x00000008 ImageRectMax #x00000000 ScanlinePad8 #x00000100 ScanlinePad16 #x00000200 ScanlinePad32 #x00000300 ScanlinePad64 #x00000000 ScanlineUnit8 #x00001000 ScanlineUnit16 #x00002000 ScanlineUnit32 #x00003000 ScanlineUnit64 except for the following bits which must be zero: #xffffccf0 zero and the following of which at most one bit may be set: #x0000000c at most one bit can be set BITMAPFORMATMASK 4 CARD32 value, mask of the following bits: #x00000001 ByteOrderMask #x00000002 BitOrderMask #x00000004 ImageRectMask #x00000008 ScanlinePadMask #x00000010 ScanlineUnitMask except for the following bits which must be zero: #xffffffe0 zero BOOL 1 BOOL boolean, one of the following values: 0 False 1 True BYTE 1 BYTE unsigned byte of data CARD8 1 CARD8 8-bit unsigned integer CARD16 2 CARD16 16-bit unsigned integer CARD32 4 CARD32 32-bit unsigned integer CHAR2B 1 CARD8 byte1 38 X Font Service Protocol X11, Release 6.4 1 CARD8 byte2 EVENTMASK 4 CARD32 event mask for core events, this is union of the following bits: #00000001 CatalogueListChangeMask #00000002 FontListChangeMask but none of the following bits set: #fffffffc extensions define their own sets of bits FONTID 4 CARD32 font identifier with at least one of the following bits set: #x1fffffff but none of the following bits set: #xe0000000 zero INT8 1 INT8 8-bit signed integer INT16 2 INT16 16-bit signed integer INT32 4 INT32 32-bit signed integer OFFSET32 4 CARD32 position (or integer value) 4 CARD32 length PROPINFO 4 n number of PROPOFFSET components 4 m number of bytes of property data 20*n PROPOFFSET property offsets into data block m LISTofBYTE property data block PROPOFFSET 8 OFFSET32 name in data block 8 OFFSET32 value in data block 1 CARD8 type, one of the following values: 0 String 39 X Font Service Protocol X11, Release 6.4 1 Unsigned 2 Signed 3 zero RANGE 2 CHAR2B minimum character code 2 CHAR2B maximum character code RESOLUTION 2 CARD16 x resolution in pixels per inch 2 CARD16 y resolution in pixels per inch 2 CARD16 point size in decipoints STRNAME 1 n length of name n STRING8 name STRING8 n LISTofBYTE array of 8-bit character values TIMESTAMP 4 CARD32 milliseconds since server time origin XCHARINFO 2 INT16 left bearing 2 INT16 right bearing 2 INT16 width 2 INT16 ascent 2 INT16 descent 2 CARD16 attributes XFONTINFO 4 CARD32 flags, union of the following bits: #x00000001 AllCharactersExist #x00000002 InkInside #x00000004 HorizontalOverlap but none of the following bits set: #xfffffff8 zero 4 RANGE range of characters in font 1 CARD8 drawing direction 0 LeftToRight 1 RightToLeft 1 unused 2 CHAR2B default character 12 XCHARINFO minimum bounds 40 X Font Service Protocol X11, Release 6.4 12 XCHARINFO maximum bounds 2 INT16 font ascent 2 INT16 font descent n PROPINFO property data 5.2. Requests open connection 1 BYTE byte order, one of the values: #x42 Most Significant Byte first #x6c Least Significant Byte first 1 CARD8 number of auth in auth-data 2 2 client-major-protocol-version 2 0 client-minor-protocol-version 2 a/4 length of auth-data a LISTofAUTH auth-data => 2 CARD16 status 0 Success 1 Continue 2 Busy 3 Denied 2 2 major version 2 0 minor version 1 CARD8 number of alternate-servers-hint 1 CARD8 authorization-index 2 a/4 length of alternate-servers-hint 2 (d+q)/4 length of authorization-data a LISTofALTERNATESERVER alternate-servers-hint d LISTofBYTE authorization-data q unused, q=pad(d) If STATUS is Busy or Denied, the protocol stops and the con- nection is closed. If STATUS is Continue, the client is expected to respond with additional data, to which the server responds with a new status value and more data. This dialog continues until the status is set to Success, or until the server sets STATUS to Busy or Denied and closes the connection: -> 4 1+(d+q)/4 length d LISTofBYTE more-authorization-data q unused, q=pad(d) => 4 2+(d+q)/4 length 2 CARD16 status 0 Success 1 Continue 2 Busy 41 X Font Service Protocol X11, Release 6.4 3 Denied 2 unused d LISTofBYTE more-authorization-data q unused, q=pad(d) When STATUS is Success, the protocol resumes with the fol- lowing sent by the server: 4 3+(v+w)/4 length of rest of data 2 CARD16 maximum-request-length 2 v length of vendor string 4 CARD32 release-number v STRING8 vendor-string w unused, w=pad(v) Once the connection has been established, the client may send the following requests: NoOp 1 0 major-opcode 1 unused 2 1 length ListExtensions 1 1 major-opcode 1 unused 2 1 length => 1 0 type reply 1 CARD8 number of names 2 CARD16 sequence-number 4 2+(n+p)/4 length n LISTofSTRNAME names p unused, p=pad(n) QueryExtension 1 2 major-opcode 1 n length of name 2 1+(n+p)/4 length n STRING8 name p unused, p=pad(n) => 1 0 type reply 1 BOOL present 2 CARD16 sequence-number 4 5 length 42 X Font Service Protocol X11, Release 6.4 2 CARD16 major-version 2 CARD16 minor-version 1 CARD8 major-opcode 1 CARD8 first-event 1 CARD8 number-events 1 CARD8 first-error 1 CARD8 number-errors 3 unused ListCatalogues 1 3 major-opcode 1 unused 2 3+(n+p)/4 length 4 CARD32 max-names 2 n length of pattern 2 unused n STRING8 pattern p unused, p=pad(n) =>+ 1 0 type reply 1 unused 2 CARD16 sequence-number 4 4+(n+p)/4 length 4 CARD32 replies-following-hint 4 CARD32 number of catalogue-names n LISTofSTRNAME catalogue-names p unused, p=pad(n) SetCatalogues 1 4 major-opcode 1 CARD8 number of catalogue-names 2 1+(n+p)/4 length n LISTofSTRNAME catalogue-names p unused, p=pad(n) GetCatalogues 1 5 major-opcode 1 unused 2 1 length => 1 0 type reply 1 CARD8 number of catalogue-names 2 CARD16 sequence-number 4 2+(n+p)/4 length n LISTofSTRNAME catalogue-names p unused, p=pad(n) 43 X Font Service Protocol X11, Release 6.4 SetEventMask 1 6 major-opcode 1 CARD8 extension-opcode 2 2 length 4 EVENTMASK event-mask GetEventMask 1 7 major-opcode 1 CARD8 extension-opcode 2 1 length => 1 0 type reply 1 unused 2 CARD16 sequence-number 4 3 length 4 EVENTMASK event-mask CreateAC 1 8 major-opcode 1 CARD8 number of authorization-protocols 2 2+a/4 length 4 ACCESSCONTEXT ac a LISTofAUTH authorization-protocols => 1 0 type reply 1 CARD8 authorization-index 2 CARD16 sequence-number 4 3+(d+q)/4 length 2 CARD16 status 0 Success 1 Continue 2 Busy 3 Denied 2 unused d LISTofBYTE authorization-data q unused, q=pad(d) If STATUS is Continue, the client is expected to respond with additional data, to which the server responds with a new status value and more data. This dialog continues until the status is set to Success, Busy, or Denied at which point the request is finished. -> 4 1+(d+q)/4 length d LISTofBYTE more-authorization-data q unused, q=pad(d) 44 X Font Service Protocol X11, Release 6.4 => 4 2+(d+q)/4 length 2 CARD16 status 0 Success 1 Continue 2 Busy 3 Denied 2 unused d LISTofBYTE authorization-data q unused, q=pad(d) FreeAC 1 9 major-opcode 1 unused 2 2 length 4 ACCESSCONTEXT ac SetAuthorization 1 10 major-opcode 1 unused 2 2 length 4 ACCESSCONTEXT ac SetResolution 1 11 major-opcode 1 n number of resolutions 2 1+(6*n+p)/4 length 6*n LISTofRESOLUTION resolutions p p=pad(6*n) GetResolution 1 12 major-opcode 1 unused 2 1 length => 1 0 type reply 1 n number of resolutions 2 CARD16 sequence-number 4 2+(6*n+p)/4 length 6*n LISTofRESOLUTION resolutions p p=pad(6*n) ListFonts 45 X Font Service Protocol X11, Release 6.4 1 13 major-opcode 1 unused 2 3+(n+p)/4 length 4 CARD32 max-names 2 n length of pattern 2 unused n STRING8 pattern p unused, p=pad(n) =>+ 1 0 type reply 1 unused 2 CARD16 sequence-number 4 4+(n+p)/4 length 4 CARD32 replies-following-hint 4 CARD32 number of font-names n LISTofSTRNAME font-names p unused, p=pad(n) ListFontsWithXInfo 1 14 major-opcode 1 unused 2 3+(n+p)/4 length 4 CARD32 max-names 2 n length of pattern 2 unused n STRING8 pattern p unused, p=pad(n) =>+(except for last in series) 1 0 type reply 1 n length of name 2 CARD16 sequence-number 4 3+(n+p+f)/4 length 4 CARD32 replies-hint f XFONTINFO font info n STRING8 name p unused, p=pad(n) =>(last in series) 1 0 type reply 1 0 last-reply indicator 2 CARD16 sequence-number 4 2 reply length OpenBitmapFont 1 15 major-opcode 1 unused 2 4+(n+p)/4 length 4 FONTID fontid 4 BITMAPFORMATMASK format-mask 46 X Font Service Protocol X11, Release 6.4 4 BITMAPFORMAT format n STRNAME pattern p unused, p=pad(n) => 1 0 type reply 1 BOOL otherid-valid 2 CARD16 sequence-number 4 4 length 4 FONTID otherid 1 BOOL cachable 3 unused QueryXInfo 1 16 major-opcode 1 unused 2 2 length 4 FONTID fontid => 1 0 type reply 1 unused 2 CARD16 sequence-number 4 2+f/4 length f XFONTINFO font info p unused, p=pad(f) QueryXExtents8 1 17 major-opcode 1 BOOL range 2 3+(n+p)/4 length 4 FONTID fontid 4 n number chars entries n STRING8 chars p unused, p=pad(n) => 1 0 type reply 1 unused 2 CARD16 sequence-number 4 3+3*n length 4 n number of extents 12*n LISTofXCHARINFO extents QueryXExtents16 1 18 major-opcode 1 BOOL range 2 3+(2*n+p)/4 length 4 FONTID fontid 4 n number chars entries 47 X Font Service Protocol X11, Release 6.4 2*n LISTofCHAR2B chars p unused, p=pad(2*n) => 1 0 type reply 1 unused 2 CARD16 sequence-number 4 3+3*n length 4 n number of extents 12*n LISTofXCHARINFO extents QueryXBitmaps8 1 19 major-opcode 1 BOOL range 2 4+(n+p)/4 length 4 FONTID fontid 4 BITMAPFORMAT format 4 n number of chars entries n STRING8 chars p unused, p=pad(n) =>+ 1 0 type reply 1 unused 2 CARD16 sequence-number 4 5+2*n+(m+p)/4 length 4 CARD32 replies-following-hint 4 n number of offsets 4 m number of bytes of glyph images 8*n LISTofOFFSET32 offsets m LISTofBYTE glyph images p unused, p=pad(m) QueryXBitmaps16 1 20 major-opcode 1 BOOL range 2 4+(2*n+p)/4 length 4 FONTID fontid 4 BITMAPFORMAT format 4 n number of chars entries 2*n LISTofCHAR2B chars p unused, p=pad(2*n) => 1 0 type reply 1 unused 2 CARD16 sequence-number 4 5+2*n+(m+p)/4 length 4 CARD32 replies-following-hint 4 n number of offsets 4 m number of bytes of glyph images 8*n LISTofOFFSET32 offsets 48 X Font Service Protocol X11, Release 6.4 m LISTofBYTE glyph images p unused, p=pad(m) CloseFont 1 21 major-opcode 1 unused 2 2 length 4 FONTID fontid 5.3. Errors Request 1 1 type error 1 0 Request 2 CARD16 sequence-number 4 4 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused Format 1 1 type error 1 1 Format 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 BITMAPFORMAT bad-format Font 1 1 type error 1 2 Font 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 FONTID bad-fontid 49 X Font Service Protocol X11, Release 6.4 Range 1 1 type error 1 3 Range 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 RANGE bad-range EventMask 1 1 type error 1 4 EventMask 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 EVENTMASK event-mask AccessContext 1 1 type error 1 5 AccessContext 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 ACCESSCONTEXT access context IDChoice 1 1 type error 1 6 IDChoice 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 FONTID bad-fontid Name 50 X Font Service Protocol X11, Release 6.4 1 1 type error 1 7 Name 2 CARD16 sequence-number 4 4 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused Resolution 1 1 type error 1 8 Resolution 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 6 RESOLUTION resolution Alloc 1 1 type error 1 9 Alloc 2 CARD16 sequence-number 4 4 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused Length 1 1 type error 1 10 Length 2 CARD16 sequence-number 4 5 length 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 4 CARD32 bad-length Implementation 1 1 type error 1 11 Implementation 2 CARD16 sequence-number 4 4 length 51 X Font Service Protocol X11, Release 6.4 4 TIMESTAMP timestamp 1 CARD8 major-opcode 1 CARD8 minor-opcode 2 unused 5.4. Events KeepAlive 1 2 type event 1 0 event KeepAlive 2 CARD16 sequence-number 4 3 length 4 TIMESTAMP timestamp CatalogueListNotify 1 2 type event 1 1 event CatalogueListNotify 2 CARD16 sequence-number 4 4 length 4 TIMESTAMP timestamp 1 BOOL added 1 BOOL deleted 2 unused FontListNotify 1 2 type event 1 2 event FontListNotify 2 CARD16 sequence-number 4 4 length 4 TIMESTAMP timestamp 1 BOOL added 1 BOOL deleted 2 unused 6. Acknowledgements This document represents the culmination of several years of debate and experiments done under the auspices of the MIT X Consortium font working group. Although this was a group effort, the author remains responsible for any errors or omissions. The protocol presented here was primarily designed by Jim Fulton, Keith Packard, and Bob Scheifler. Special thanks goes to Ned Batchelder, Jim Flowers, and Axel Deininger for their invigorating comments which never failed to make this a better document. Stephen Gildea edited ver- sion 2 of this document. Finally, David Lemke deserves great credit for designing and coding the sample 52 X Font Service Protocol X11, Release 6.4 implementation. 7. References All of the following documents are X Consortium standards available from the X Consortium. [1] Scheifler, Robert W. ``X Window System Protocol Ver- sion 11'' [2] Adobe Systems. ``Bitmap Distribution Format 2.1'' [3] X Consortium. ``X Logical Font Description Conven- tions, Version 1.5'' 53 X Font Service Protocol X11, Release 6.4 Appendix A Suggested Licensing Policies The authorization data passed by the client in the initial connection setup information may be used by the font server to implement restrictions on which fonts may be accessed. Furthermore, the font server is free to refuse new connec- tions at any time. Configuration or management of the license restrictions is outside the scope of the font service protocol and is done in a server-dependent manner. Possible policies might include, but are not limited to, combinations of the follow- ing: a. No restrictions - anyone may access any fonts. The server neither refuses any connections nor generates AccessContext errors on any fonts. For environments without specially-licensed fonts, this is sufficient. b. Per-machine - only those clients connecting from a known set of machines are permitted access. The server could get the address of the connection and look in a list of allowed machines. c. Per-user - only a known set of users may access the fonts. The server can use the authorization data (such as a Kerberos ticket or a Secure RPC credential) to verify the identity of the user and then look in a list of allowed users. d. Simultaneous Use - only a certain number of clients may use a given font at any one time. Additional clients would receive AccessContext errors if they attempt to open the font. This is only effective if the initial clients keep the font open for the entire time that it is being used (even if all of the data has been trans- mitted and is being cached). e. Postage Meter - a particular font may only be accessed a limited number of times before its license must be renewed. Each time the font is opened, the server decrements a counter. When the counter reaches zero, all further attempts to open the font return an Access- Context error. It should be noted that chaining of font servers (obtaining font data from other font servers) may conflict with certain license policies. 54 X Font Service Protocol X11, Release 6.4 Appendix B Implementation Suggestions Font server implementations will probably wish to use tech- niques such as the following to avoid limits on the number of simultaneous connections: a. The initial connection information returned by the font server contains the names of other font servers that may be used as substitutes. A font server may refuse to accept a connection, indicating that the client should try one of the alternatives instead. b. On operating systems that support processing forking, font servers might choose to fork so that the child can continue processing the existing connections and the parent can accept new connections. Such implementa- tions are encouraged to use shared memory so that in- memory font databases can be shared. c. On operating systems that support passing stream file descriptors between processes, cooperating font servers could collect connections in a single process when there are few connections and spread them among several processes as the load increases. d. If a font client is unable to connect to a server (as opposed to having the connection terminated), it should retry for an implementation-dependent length of time (see Xlib's handling of ECONNREFUSED in XConnDis.c). 55 X Font Service Protocol X11, Release 6.4 56 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . 1 2. Architectural Model . . . . . . . . . . . . . . 2 3. Font Server Naming . . . . . . . . . . . . . . . 3 3.1. TCP/IP Names . . . . . . . . . . . . . . . . . 4 3.2. DECnet Names . . . . . . . . . . . . . . . . . 4 4. Protocol . . . . . . . . . . . . . . . . . . . . 4 4.1. Data Types . . . . . . . . . . . . . . . . . . 5 4.2. Requests . . . . . . . . . . . . . . . . . . . 15 4.3. Errors . . . . . . . . . . . . . . . . . . . . 32 4.4. Events . . . . . . . . . . . . . . . . . . . . 35 5. Protocol Encoding . . . . . . . . . . . . . . . 36 5.1. Data Types . . . . . . . . . . . . . . . . . . 37 5.2. Requests . . . . . . . . . . . . . . . . . . . 41 5.3. Errors . . . . . . . . . . . . . . . . . . . . 49 5.4. Events . . . . . . . . . . . . . . . . . . . . 52 6. Acknowledgements . . . . . . . . . . . . . . . . 52 7. References . . . . . . . . . . . . . . . . . . . 53 Appendix A - Suggested Licensing Policies . . . . . 54 Appendix B - Implementation Suggestions . . . . . . 55 i